Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\wup512.exe. The updater will begin installing. 

Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\wup512-French.exe. The updater will begin installing. 

Économiser le dossier à C:\. Une fois que le dossier est téléchargé, aller au bouton marche de Windows et choisir la course. 
Quand la zone de dialogue de course apparaît, saisir C:\wup510-French.exe. 
L'updater commencera à installer.

Version 5.0.7 (Build 9 of Quilt-Pro.)
issued 5th November 2007
.
CARE
  Updater for Macintosh version of Quilt-Pro Version 5
(5.11.2007)

Version 5.0.7 Build 9 of Quilt-Pro. Click here to download the latest update for Quilt-Pro Version 5. This version (5.0.7 B9) is a Universal application. This updater will update Version 5.0.5 or later to 5.0.7 Build 9. If you do not already have version 5.0.5 or later. 
If you have an earlier version, you will need to download the Build 5 updater below 
and apply it first. This updater is 4.9 MB (5,160,346 bytes) and will take 
about 30 minutes to download with a 28.8 kbps modem.

Version 5.0.5 Build 5 of Quilt-Pro. Click here to download the latest update for Quilt-Pro Version 5. This updater will update any Quilt-Pro Version 5 for Macintosh to 5.0.5 Build 5. This updater is 1.81 MB (1,902,570 bytes) and will take about 12 minutes to 
download with a 28.8 kbps modem.

The Macintosh updater files are BinHex encoded files. Your Mac web browser will normally decode them for you. If, for some reason it doesn't, you will need something like Stuffit to decode the file. You may buy Stuffit at almost any Mac retailer or download a free expander version from http://www.stuffit.com. Look for the link that says 'Download Stuffit Expander'.

The updater will require the entry of the username and password of an admin user on the Mac before it will run. 

Quilt-Pro File Manager for Windows Version 1.2
(19-9-2008) 

This is the Quilt-Pro File Manager utility program. With this program you may copy the blocks from any Block Factory, Foundation Factory or Strip Piecing Wizard program (except the Quilter's Newsletter Edition) into Quilt-Pro version 3 or higher. Macintosh users, consult your Foundation Factory CD for information about installing blocks into Quilt-Pro.

Click here to download the program now 2.45 MB ((2,592,768 bytes). Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\QPFileManager.exe.

Or

If you have problems downloading the EXE file or would like a smaller download 954 KB (977,391 bytes), Click here to download a zip file containing the program. Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\QPFileManager.zip. Extract the QPFileManager.exe to C:\. Go to the Windows start button and select Run. When the Run dialog box appears, type in C:\QPFileManager.exe. 

FINAL Updater File for Windows Version 4 ONLY
 Version 4.9.4 of Quilt-Pro.
Click here to download the latest update for Quilt-Pro Version 4. This updater will also update French versions of Quilt-Pro to 4.9.4. You must already have Quilt-Pro 4 installed on your system to use this file. It is 1.24 MB (1,310,547 bytes) long and will take about 8-9 minutes to download if you are using a 28.8 kbps modem.
Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\wup494.exe. The updater will begin installing.

Version 4.9.4 of Quilt-Pro in French.
Download this if you have an English only version of Quilt-Pro installed and would like to have Quilt-Pro display everything in French. 
NOTE: This update is very large, 11.7 MB (12,327,044 bytes) and includes new help files and an online version of the manual in French. It would take about 75 minutes to download with a 28.8 kbps modem. 
If you already have a French version of Quilt-Pro, and just need to update to the latest version, download the normal updater. 
Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\wup49-French.exe. The updater will begin installing.

You should also take a copy of the updater file for future use, just in case
you have to reinstall Quilt Pro at some later date. You can then delete the 
updater file from your hard disk. 
Please note that any future updates 
issued will include all previous updates for the
version (ie 3 or 4) for which they were issued. 

  FINAL Updater for Windows version of Quilt-Pro Version 3.

Version 3.6.4 of Quilt-Pro.
Click here to download the latest update for Quilt-Pro Version 3.
    You must already have Quilt-Pro installed on your system
    to use this file. It is 743k bytes long and will take about 5 minutes to
    download if you are using a 28.8 kbps modem.

    Save the file to C:\.   Once the file is downloaded, go to the Windows start
    button and select Run.  When the Run dialogue box appears, type in
    C:\wup364.exe.   The updater will begin installing.

 Once installed you can then delete the updater
from your hard disk, having first made a copy on a floppy just in 
case you need to re-install Quilt Pro at a later date

All Quilt-Pro for Macintosh updater files are BinHex encoded. 
Your Mac web browser will normally decode it for you. If, for some
reason it doesn't,  you will need something like Stuffit to decode the file. 
You may buy Stuffit at almost any Mac retailer or download a free expander version 
from Aladdin Systems. Look for the link that says 'Free  Downloads'.

x*x*x*x*x*x*x*x*x*x*x*
 

  NEW  Version 3.6.4 Build 4 of Quilt-Pro. This updater is approximately 
749k bytes and will take about 6-8 minutes to download with a 
28.8 kbps modem. This update will only update a Build 3 Quilt-Pro to 
Build 4,  If you are not running Build 3 of Quilt-Pro, you will need to
    download another updater (listed below) to update to Build 3, 
before you can apply this update.
 

Version 3.6.4 Build 3 of Quilt-Pro. These update files are approximately 2MB 
in size and will take about 12-13 minutes to download with a 28.8 kbps modem. 

You only need one of the files to update your program. Ascertain which version 
you currently have ( by checking the "About Quilt Pro" legend when you 
have Quilt Pro open) and then pick the appropriate file below - 
but if you are in any doubt please give me a call on 01763 288234.

The updater files are BinHex encoded. Your Mac web browser will
normally decode it for you. If, for some reason it doesn't, you will need 
something like Stuffit Expander  to decode the file. You may buy 
Stuffit at almost any Mac retailer or download a free expander
version from Aladdin Systems. 
Look for the link that says 'Free Downloads'. Or obtain one from a 
Magazine CD - like MacFormat or MacUser
 

Update Mac Version 3.5 Build 1 to Version 3.6.3 Build 3. 
 

Update Mac Version 3.5.2 Build 2 to Version 3.6.3 Build 3. 

Build 2 included a fix for the Block Index menu item. In order for it to work,
you needed to download this file (BlockIndex.sea.hqx). Unstuff this file to the 
same folder where you installed Quilt-Pro. When you are finished, 
you should have a Help folder in your Quilt-Pro folder. Inside that Help 
folder you should have a BlockIndex folder. If Build 2 does not find the 
files in the correct location, the Block Index menu item will not appear. 

Updater for Mariners Compass or Kansas City Star or
Quilters Newsletter CD versions
of the Block Factory 
and Foundation Factory Version 2.
Dated 19.12.2007

    Version 2.4.2 of Foundation Factory. Click here to download the latest update for Foundation Factory Version 2. You must already have Foundation Factory installed on your system to use this file. It is 808K (827,933) bytes long and will take about 5 minutes to download if you are using a 28.8 kbps modem.

Save the file to C:\. Once the file is downloaded, go to the Windows start button and select Run. When the Run dialog box appears, type in C:\ff2updater.exe. The updater will begin installing. 

Save the file to C:\.   Once the file is downloaded, go to the Windows start button 
and select Run.  When the Run dialogue box appears type in C:\ff2updater.exe.
The updater will begin installing. You will need to change the default directory
if you wish to update The Mariners Compass, Kansas City Star or QNM CD
programmes by use of the Browse button. Contact me if you need help or guidance
in this respect.

Those of you with the KC Star Vol. 1 CD will also need to download 
this file (KCStarLib.exe).
It is a self-extracting zip file. Just run it after downloading 
(see instructions above). By default, it will unzip to C:\Program Files\KCStar. 
If that is not where you installed the KC Star CD, 
change it to the correct location. 

Version 3 Owners can now download "Real fabric" palettes from RJR, 
Debbie Mumm, Kona Bay and P & B direct from Quilt-Pro's web site at 
 www.quiltstash.com

Updates for Quilt Pro for Windows Version 2 Owners

   Click here to download version 2.7 for the last update for Version 2. You 
must have Quilt-Pro Version 2.0 installed on your system to use this file. 
It is 488 bytes long and will take about 5 minutes to  download with
a 28.8kbps modem.

    After downloading this file, just double-click on the FILE - "winupd27.exe" 
to update your Version of Quilt-Pro

Macintosh Version 2 Users can also download the latest updates for their
version direct from Quilt Pro's web site at www.quiltpro.com - 
go to the Updates page.